Single-bay portal frames with pinned or fixed bases, three-hinged, two-hinged and fixed parabolic arches, thin circular rings. Every formula is checked numerically; straight beam cases open in the beam calculator, already set up.

Strength of materials handbook: notation, conventions and methods

Single-bay portal frames

Portal frame with pinned bases, uniform load q on the beam

qABCDI₁I₁I₂Lh
Stiffness parameterk=I2hI1L (I₁: columns; I₂: beam)
ReactionsVA=VB=qL2;HA=HB=H=qL24h(2k+3)
Knee momentsMC=MD=−Hh=−qL24(2k+3) (outer fibre in tension)
Moment at mid-beamMt=qL28−Hh

Portal frame with pinned bases, point load P at mid-beam

PABCDI₁I₁I₂Lh
Stiffness parameterk=I2hI1L (I₁: columns; I₂: beam)
ReactionsVA=VB=P2;H=3PL8h(2k+3)
Knee momentsMC=MD=−Hh
Moment under the loadMP=PL4−Hh

Portal frame with pinned bases, horizontal force F at the top

FABCDI₁I₁I₂Lh
ReactionsHA=HB=F2;VA=−VB=−FhL
Knee momentsMC=−MD=Fh2

Portal frame with fixed bases, uniform load q on the beam

qABCDI₁I₁I₂Lh
Stiffness parameterk=I2hI1L (I₁: columns; I₂: beam)
ReactionsVA=VB=qL2;H=qL24h(k+2)
Knee momentsMC=MD=−qL26(k+2)
Base momentsMA=MB=qL212(k+2)
Moment at mid-beamMt=qL28−qL26(k+2)

Portal frame with fixed bases, point load P at mid-beam

PABCDI₁I₁I₂Lh
Stiffness parameterk=I2hI1L (I₁: columns; I₂: beam)
ReactionsVA=VB=P2;H=3PL8h(k+2)
Knee momentsMC=MD=−PL4(k+2)
Base momentsMA=MB=PL8(k+2)
Moment under the loadMP=PL4−PL4(k+2)

Portal frame with fixed bases, horizontal force F at the top

FABCDI₁I₁I₂Lh
Stiffness parameterk=I2hI1L (I₁: columns; I₂: beam)
ReactionsHA=HB=F2;VA=−VB=−3kFhL(6k+1)
Base momentsMA=MB=Fh(3k+1)2(6k+1)
Knee momentsMC=MD=3kFh2(6k+1)

Arches

Three-hinged parabolic arch, uniform load q

qABCfL
Parabolic archy=4fx(L−x)L2
ReactionsVA=VB=qL2;H=qL28f
MomentM=0 at every point (the parabolic arch is the funicular of the uniform load)
Maximum axial force (at the springings)Nmax=V2+H2

Three-hinged parabolic arch, point load P at the crown

PABCfL
Parabolic archy=4fx(L−x)L2
ReactionsVA=VB=P2;H=PL4f
Maximum momentMmax=PL16 at the quarter points (outer fibre in tension)

Three-hinged parabolic arch, uniform load q over half the span

qABCfL
Parabolic archy=4fx(L−x)L2
ReactionsVA=3qL8;VB=qL8;H=qL216f
Maximum momentMmax=qL264 at the quarter points (of opposite signs)

Two-hinged parabolic arch, uniform load q

qABCfL
Parabolic archy=4fx(L−x)L2
Horizontal thrustH=qL28f (elastic shortening neglected)
MomentM=0 at every point

Two-hinged parabolic arch, point load P at the crown

PABCfL
Parabolic archy=4fx(L−x)L2
AssumptionI=I0cos⁡φ (inertia increasing towards the springings), elastic shortening neglected
ReactionsVA=VB=P2;H=25PL128f
Crown momentMC=7PL128

Fixed parabolic arch, uniform load q

qABCfL
Parabolic archy=4fx(L−x)L2
Horizontal thrustH=qL28f (elastic shortening neglected)
MomentM=0 at every point, including the springings

Fixed parabolic arch, point load P at the crown

PABCfL
Parabolic archy=4fx(L−x)L2
AssumptionI=I0cos⁡φ, elastic shortening neglected
Horizontal thrustH=15PL64f
MomentsMC=3PL64 at the crown; MA=MB=PL32 at the springings (of opposite sign)

Rings

Thin circular ring, two diametrically opposite point loads P

PPBAR
Moment under the loads (A)MA=PRπ≈0,318PR (inner fibre in tension)
Moment at 90° (B)MB=PR()12−1π)≈0,182PR (outer fibre in tension)
Axial force at BNB=P2 (compression)
Shortening of the loaded diameterΔ1=()π4−2π)PR3EI≈0,149PR3EI
Lengthening of the perpendicular diameterΔ2=()2π−12)PR3EI≈0,137PR3EI

Thin circular ring under uniform radial pressure p

pR
Axial forceN=pR (compression for external pressure, tension for internal pressure)
MomentM=0
Change in radiusΔR=pR2EA

Preliminary design aids, provided for guidance only: they do not replace calculations prepared by an engineer. Found an error, have a suggestion? Write to us.