Fixed–pinned and fixed–fixed beams, and continuous beams with two to four spans. Every formula is checked numerically; straight beam cases open in the beam calculator, already set up.

Strength of materials handbook: notation, conventions and methods

Beam fixed at one end and pinned at the other

Uniformly distributed load q

qABL
ReactionsRA=5qL8;RB=3qL8
Fixed-end momentMA=−qL28
Maximum span momentMt=9qL2128 at x=3L8 from B
Maximum deflectionfmax≈qL4185EI at x≈0,4215L from B
Rotation at support BθB=−qL348EI

Calculate this case

Point load P at midspan

PABL/2L/2
ReactionsRA=11P16;RB=5P16
Fixed-end momentMA=−3PL16
Moment under the loadMP=5PL32
Maximum deflectionfmax=PL3485EI at x=L5 from B
Rotation at support BθB=−PL232EI

Calculate this case

Point load P at distance a from the fixed end

PABab
ReactionsRB=Pa2(3L−a)2L3;RA=P−RB
Fixed-end momentMA=−Pab(L+b)2L2
Moment under the loadMP=Pa2b(3L−a)2L3

Calculate this case

Triangular load, from 0 at fixed end A to q at support B

qABL
ReactionsRA=9qL40;RB=11qL40
Fixed-end momentMA=−7qL2120

Calculate this case

Moment C applied at support B

CABL
ReactionsRB=−RA=3C2L (C clockwise)
Fixed-end momentMA=C2
Rotation at support BθB=CL4EI (same direction as C)

Calculate this case

Beam fixed at both ends

Uniformly distributed load q

qABL
ReactionsRA=RB=qL2
Support momentsMA=MB=−qL212
Midspan momentMt=qL224
Maximum deflectionf=qL4384EI (at midspan)

Calculate this case

Point load P at midspan

PABL/2L/2
ReactionsRA=RB=P2
Support momentsMA=MB=−PL8
Moment under the loadMP=PL8
Maximum deflectionf=PL3192EI

Calculate this case

Point load P at any position

PABab
ReactionsRA=Pb2(3a+b)L3;RB=Pa2(a+3b)L3
Support momentsMA=−Pab2L2;MB=−Pa2bL2
Moment under the loadMP=2Pa2b2L3
Deflection under the loadfP=Pa3b33EIL3
Maximum deflection (a ≤ b)fmax=2Pa2b33EI(3b+a)2 at x=2bL3b+a from B

Calculate this case

Triangular load, from 0 at A to q at B

qABL
ReactionsRA=3qL20;RB=7qL20
Support momentsMA=−qL230;MB=−qL220
Maximum deflectionfmax≈qL4764EI at x≈0,525L from A

Calculate this case

Uniform load q over half the span

qABL/2L/2
ReactionsRA=13qL32;RB=3qL32
Support momentsMA=−11qL2192;MB=−5qL2192

Calculate this case

Continuous beams

Two equal spans, uniform load q on both spans

qABCLL
ReactionsRA=RC=3qL8;RB=5qL4
Moment at the central supportMB=−qL28
Maximum span momentMt=9qL2128 at 3L8 from the end supports
Maximum deflectionfmax≈qL4185EI at 0,4215L from the end supports

Calculate this case

Two equal spans, uniform load q on one span only

qABCLL
ReactionsRA=7qL16;RB=5qL8;RC=−qL16
Moment at the central supportMB=−qL216
Maximum moment in the loaded spanMt=49qL2512 at 7L16 from A

Calculate this case

Two equal spans, point load P at the middle of each span

PPABCLL
ReactionsRA=RC=5P16;RB=11P8
Moment at the central supportMB=−3PL16
Moment under the loadsMP=5PL32

Calculate this case

Two unequal spans L₁ and L₂, uniform load q

qABCL₁L₂
Moment at the central supportMB=−q(L13+L23)8(L1+L2)
End reactionsRA=qL12+MBL1;RC=qL22+MBL2
Central reactionRB=q(L1+L2)−RA−RC

Calculate this case

Three equal spans, uniform load q on all three spans

qABCDLLL
ReactionsRA=RD=0,4qL;RB=RC=1,1qL
Moments at intermediate supportsMB=MC=−0,1qL2
Span momentsMrive=0,08qL2 ; Mcentrale=0,025qL2
Maximum deflectionfmax≈0,0069qL4EI in the end spans

Calculate this case

Three equal spans, uniform load q on the central span only

qABCDLLL
ReactionsRA=RD=−qL20;RB=RC=11qL20
Support momentsMB=MC=−qL220
Moment at the middle of the central spanMt=3qL240

Calculate this case

Three equal spans, uniform load q on both end spans

qqABCDLLL
ReactionsRA=RD=0,45qL;RB=RC=0,55qL
Support momentsMB=MC=−qL220
Maximum moment in the end spansMt=0,10125qL2 at 0,45L from the end supports

Calculate this case

Three equal spans, point load P at the middle of each span

PPPABCDLLL
ReactionsRA=RD=0,35P;RB=RC=1,15P
Support momentsMB=MC=−0,15PL
Moments under the loadsMrive=0,175PL ; Mcentrale=0,1PL

Calculate this case

Four equal spans, uniform load q on all four spans

qABCDELLLL
ReactionsRA=11qL28;RB=8qL7;RC=13qL14
Support momentsMB=−3qL228;MC=−qL214
Maximum span momentsM1≈0,0772qL2 ; M2≈0,0364qL2
Maximum deflectionfmax≈0,0065qL4EI in the end spans

Calculate this case

Preliminary design aids, provided for guidance only: they do not replace calculations prepared by an engineer. Found an error, have a suggestion? Write to us.